Shopping Cart  |  Intelligence Center
EXTENDING FIELD OF VIEW IN ADVANCED IMAGING SYSTEMS
Friday, August 9, 2019
ARLINGTON, Va. -- The military relies on advanced imaging systems for a number of critical capabilities and applications - from Intelligence, Surveillance, and Reconnaissance (ISR) and situational awareness to weapon sights. These powerful systems enable defense users to capture and analyze visual data, providing key insights both on and off the battlefield. Today, nearly all imaging systems rely on detector arrays fabricated using planar processes developed for electronic integrated circuits on flat silicon. While significant progress has been made in advancing these technologies for narrow field of view (FOV) systems, optical aberrations can limit the performance at the periphery in wide FOV systems that then require large, costly, and complex optics to correct. The trade-off for correcting optical aberrations by using large, heavy lenses is a reduction in optical signal and a large size penalty, which limits their use for new and emerging capabilities.

DARPA developed the FOcal arrays for Curved Infrared Imagers (FOCII) program to expand upon the current commercial trend for visible sensor arrays by extending the capability to both large and medium format midwave (MWIR) and/or longwave (LWIR) infrared detectors. The program seeks to develop and demonstrate technologies for curving existing state-of-the-art large format, high performance IR FPAs to a small radius of curvature (ROC) to maximize performance, as well as curve smaller format FPAs to an extreme ROC to enable the smallest form factors possible while maintaining exquisite performance.

FOCII will address this challenge through two approaches to fabricating a curved FPA. The first involves curving existing state-of-the-art FPAs, while keeping the underlying design intact. The focus of the research will be on achieving significant performance improvements over existing, flat FPAs, with a target radius of curvature of 70mm. The fundamental challenge researchers will work to address within this approach is to mitigate the mechanical strain created by curving the FPGA, particularly in silicon, which is very brittle.

The second approach will focus on achieving an extreme ROC of 12.5 mm to enable a transformative reduction in the size and weight compared to current imagers. Unlike the first approach, researchers will explore possible modifications to the underlying design, including physical modifications to the silicon that could relieve or eliminate stress on the material and allow for creating the desired curvature in a smaller sized FPA. This approach will also require new methods to counter the effects of any modifications during image reconstruction in the underlying read-out integrated circuit (ROIC) algorithm.

Source:  U.S. DARPA
Associated URL: Click here to visit
Author: U.S. DARPA 

 

MORE NEWS CATEGORIES
AEROSPACE & DEFENSE ELECTRONICS
AIRLINES, COMMERCIAL AVIATION & MAINTENANCE
AVIATION ENGINES, PROPULSION & AUXILIARY POWER UNITS
INDUSTRIAL & MARINE GAS TURBINES
INTERNATIONAL MILITARY MARKETS & BUDGETS - ASIA, AUSTRALIA & PAC RIM/EURASIA
INTERNATIONAL MILITARY MARKETS & BUDGETS - EUROPE
INTERNATIONAL MILITARY MARKETS & BUDGETS - NORTH AMERICA
MILITARY AIRCRAFT
MILITARY VEHICLES, ORDNANCE, MUNITIONS, AMMUNITION & SMALL ARMS
MISSILES & MISSILE SYSTEMS
NAVAL SHIPS AND OPERATING SYSTEMS
NON-US AEROSPACE/DEFENSE COMPANIES & CONTRACTS
REGIONAL, BUSINESS & GENERAL AVIATION
ROTORCRAFT
SPACECRAFT, LAUNCH VEHICLES & SATELLITES
US AEROSPACE/DEFENSE COMPANIES & CONTRACTS
Drones and Unmanned Systems - Air, Sea, Land, Micro & Robot Systems
UTILITIES, ROTATING MACHINERY & POWER GENERATION


NOTICE TO USERS

Warranty: Forecast International makes no guarantees as to the veracity or accuracy of the information provided. It warrants only that the information, which has been obtained from multiple sources, has been researched and screened to the best of the ability of our staff within the limited time constraints. Forecast International encourages all clients to use multiple sources of information and to conduct their own research on source data prior to making important decisions. All URLs listed were active as of the time the information was recorded. Some hyperlinks may have become inactive since the time of publication.

Technical Support: Phone (203)426-0800 e-mail support@forecast1.com

Subscription Information: Phone (203)426-0800 or (800)451-4975; FAX (203)426-0223 (USA) or e-mail sales@forecast1.com

Aerospace/Defense News Highlights is published by Forecast International, 22 Commerce Road, Newtown CT 06470 USA. Articles that list Forecast International as the source are Copyrighted © 2019. Reproduction in any form, or transmission by electronic or other means, is prohibited without prior approval from the publisher.

Forecast International invites all interested companies to submit their announcements and press releases for review and inclusion in our Intelligence Letters.

Contact: Ray Peterson, Director of Research
Email: Ray.Peterson@forecast1.com
Phone: 800-451-4975
Fax: 203-270-8919


HOME PRODUCTS & SERVICES NEWS CONTACT US PRIVACY STATEMENT TERMS AND CONDITIONS

Forecast International © 2019 22 Commerce Rd Newtown, CT 06470 USA Phone: 203.426.0800 Toll-Free: 800.451.4975 (USA & Canada) Fax: 203.426.0223 sales@forecast1.com